2015年計算機四級網工考試：路由器配置命令
Router > enable
Password :
Router #
Router # configure terminal
Router (config) #
Router (config) # int f0/12
Router (config-if) #
Router (config) # line vty 0 15
Router (config-line) #
Router (config) # router rip
Router (config-router) #
2、配置遠程登錄密碼
Router (config) # line vty 0 15
Router (config-line) # password 7 zzz307
3、拷貝配置文件到TFTP Server
Router # write network
4、拷貝running-config 到TFTP Server
Router # copy running-config tftp:
5、拷貝bootflash 中的配置文件到TFTP Server
Router # copy bootflash : tftp :
6、從TFTP Server 拷貝配置文件到路由器
Router # copy tftp : running-config
7、將TFTP Server 上的配置文件拷貝到bootflash
Router # copy tftp : bootflash :
8、配置路由器的主機名
Router (config) #hostname Router-phy
9、配置超級用戶口令
Router (config) # enable secret phy123
10、設置系統時鐘
Router # calendar set 10:24:00 30 march 2009
11、保存配置
Router # write memory
Router # write network tftp
12、刪除配置
Router # write erase
13、基本檢測命令(telnet、ping、trace)
Router > telnet paris/222.34.27.1
Router > ping 182.105.130.110
Router > trace 137.189.11.73
Router > traceroute www.cisco.com
14、查看flash、系統時鐘、軟硬件版本、路由器配置、查看路由表、IP路由協議的詳細信息
Router > show flash
Router > sh clock
Router > sh version
Router # sh configuration
Router # sh ip route
Router # sh ip protocols
15、配置接口描述信息
Router (config-if) # description To-BeiJing Foreign Studies University
16、配置接口帶寬
Router (config-if) # bandwidth 2500,000
17、配置接口的IP地址
Router (config-if) # ip address 202.112.7.249 255.255.255.252
18、接口的開啟與關閉
Router (config-if) # shutdown/no shutdown
19、不作ARP代理
Router (config-if) # duplex ful
l# no ip directed-broadcast
# no ip proxy-arp
20、配置異步串行接口
Router (config) # interface a1
Router (config-if) # ip unnumbered ethernet0
Router (config-if) # encapsulation ppp
Router (config-if) # async default ip address 202.112.7.129
Router (config-if) # async dynamic routing
Router (config-if) # async mode interactive
Router (config-if) # no shutdown
Router (config-if) # exit
Router (config) # exit
Router (config) #